Mold for casting plastic parts for TV housing
The TV body plastic parts injection mold is the key technological equipment required for the production of TV body plastic parts.
Description
marker
Product Description
The TV body plastic parts injection mold is the key technological equipment required for the production of TV body plastic parts. The production of the mold is carried out in accordance with the requirements of precision manufacturing: high-alloy die steel is used as the starting material, which goes through the stages of roughing, heat treatment, finishing and surface polishing. Key production steps include cavity machining, gating system design, cooling channel machining, mold lapping and assembly, and trial casting and validation. The finished mold is characterized by high precision, long service life and stability of the casting process, and is widely used for the production of plastic parts for TV cases, ensuring the stability of mass production of plastic products.
Main Features
1. High precision molding: the use of high-precision processing technologies ensures that there are no visible joint lines, shrinkage cavities and other defects on the surface of plastic parts.
2. High cooling efficiency: Built-in evenly distributed cooling channel system ensures uniform cooling of parts, shortening cycle time and minimizing distortion.
3. Long service life: The mold material undergoes special heat treatment and surface hardening, which can withstand long-term operating loads under high pressure casting conditions.
4. Wide adaptability: The design of the gating system and ventilation system is optimized taking into account the complex geometry and appearance requirements of the plastic parts of the TV case, which can reduce the percentage of defects during molding.
contact us
Related Popular Products
One-piece structural element - double car door reinforcement (internal and external)
The one-piece structural element, the vehicle's dual door reinforcement (inner and outer), is a key integrated component required for side impact safety in today's vehicles.
Top half of hot stamping die for single door reinforcement
The top half of the single door reinforcement hot stamping die (the key component of the die) is the mandatory processing equipment required for the production of hot stamping single door reinforcements.
Reinforcement beam for rear side part of rear floor
The rear floor reinforcement beam is a key structural element required to provide body rigidity and crash safety in the passive safety systems of modern vehicles.
Bottom half of single door reinforcement hot stamping die
The lower half of the single door reinforcement hot stamping die (full die assembly) is the key processing equipment for the mass production of hot stamping single door reinforcements.
Plastic housing of automotive electronic module
The automotive electronics module's plastic housing is a key protective component required for modern automotive electronic control systems.
Hot stamping die for rear side rear floor reinforcement beam
The hot stamping die for the rear side reinforcement beam of the rear floor is the key technological equipment required for the production of hot-stamped car rear floor parts.
Hot-forged A-pillar reinforcement
The hot-formed A-pillar reinforcement is a key design element required for side impact safety in modern vehicles.
Plastic part of car controls
The plastic vehicle control part is a key functional component required for modern automotive interior systems.
Hot-stamped body sill elements
Hot-stamped rocker panels and side floor beams are key components that provide underbody protection and structural rigidity to modern vehicles.
Plastic car exterior parts
Plastic exterior car parts are a key component needed to shape the appearance and protection of modern vehicles.
Plastic front structural frame of the car
The plastic front structural frame/car radiator bracket is a key structural element required for the front end of modern vehicles.
Die for cold stamping of large car body panels
Fabrication: Made from die steel (eg Cr12MoV/DC53) using CNC machining, heat treatment and surface treatment. Designed for use on large presses.
One-piece car door reinforcement single-piece design
The single-piece vehicle door reinforcement is a one-piece molded structural element that is a key integrated component required for side impact safety in today's vehicles.
Progressive die for cold forming of automotive parts
Technology: Made from high-hardness die steel using precision machining, heat treatment, polishing and other operations. Designed for use on high and medium speed stamping lines.
Car body reinforcement element
Technology: Multi-operational cold forging using a multi-position progressive die. Includes blanking, forming, punching and trimming operations, which ensures highly accurate part geometry.
Plastic part of the TV case
The plastic part of the TV cabinet is a key component needed to shape the appearance and protect the structure of modern TVs.
